High Rise Pan™
The High Rise Pan™ is an innovative new plastic drain pan design which allows
placement of an air handler 2-3/4” above the outside lip of the pan without the need for separate, cumbersome mounting blocks. The pan has a molded-in network of risers to give a 5” lift. The risers are positioned to accept a wide variety of air handler sizes. Each riser has a specially shaped area at each end to accommodate a 2” x 2” anti-vibration pad which allows for quiet
operation at all times.
| Nestable | Because DiversiTech High Rise Pans™ are nestable, there is a tremendous decrease in volume needed to store and transport the pans. |
|---|---|
| Eliminates a single line vendor | Eliminating a vendor cuts distributor costs and saves warehouse and transportation costs. |
| Water pushes to the side of the pan | This prevents stagnant water in inaccessible areas which helps prevent slime and algae buildup, eliminating call backs because of smell. |
| Includes EVA™ pads | EVA™ pads increase the overall height of the unit which increases available drain line pitch. EVA™ pads also create better sound and vibration dampening for a quieter installation, meaning less call backs due to noise. |
| Standard anti-vibration pad | Uses a standard, easily available anti-vibration pad, eliminating the need to stock extra SKUs of anti–vibration pads. Competitor products use specialized grommets which are not commonly available. |
| Installation kit includes six EVA™ pads and Condensate Cop™ float switch | The universal CC-1 can be placed anywhere on the pan. It can also be used on other secondary drain pans (metal or plastic). You will never forget a part because you have a complete kit! |
| 80% thicker than the standard drain pan | Stronger and more durable for job site installations; resists work place installation damage, minimizing the need to replace drain pans damaged at job site. |
| ABS construction/flexible material | Time-tested material has been used for 5 years in the market. Flexibility allows for easier fit in tight work places and a faster installation. You’ll have peace of mind for long term performance. |
| Heat/cold resistance | Meets structural and temperature requirements for attic installations. |
| 5” riser | 5” riser gives additional height needed to assure proper drain line pitch. Stack EVA™ pads for additional height. |
| Heavy-duty reinforced construction | Gives support for a wider range of air handler applications, minimizing the need to replace drain pans damaged at the job site. |